How to Properly Capture Weld Fumes at the Source?

Welding is a common process in many factories and workshops. While it can be a very efficient way to join two pieces of metal together, it also produces fumes that can be harmful to your health if you are exposed to them for long periods of time. In this article, we will discuss how to capture welding fumes at the Source so that you can protect yourself and your employees from their harmful effects.

Why is it Important to Capture Welding Fumes at the Source?

Welding fumes are made up of tiny particles that can be inhaled deep into your lungs. These particles can contain harmful chemicals that can damage your health over time. Exposure to welding fumes has been linked to a variety of health problems, including cancer and other respiratory illnesses. In order to protect your health, it is important to capture welding fumes at the Source so that you are not exposed to them.

What are the Methods for Capturing Welding Fumes at the Source?

There are a variety of methods that can be used to capture welding fumes. And one way to capture welding fumes is to use welding fume extraction units that are placed close to the welding arc. The method you choose will depend on the type of welding you are doing and the amount of fumes that are produced. Some of the most common methods include :

  1. Installing a Fume Extractor: A fume extractor is a device that captures welding fumes at the Source and filters them before they are released into the air. The fumes are then passed through a series of filters to remove the harmful particles before they are released into the air. It will also benefit if you know what a fume extraction system is & how it works, as this will help you to choose the most effective system for your needs.
  1. Using a Fume Hood: They are self-contained ventilated boxes that draw gases, fumes, and harmful vapors into our bodies that we don’t want to do because it’s bad for our health. It begins this process by drawing air from the room inside through the sash. Any chemical reaction, such as an explosion that might occur in the lab or working area, is physically separated from us by the sash on the fume hood.
  1. Use of a Local Exhaust Ventilation System: An LEV system consists of an extraction hood, ductwork, and a fan. The extractor hood is placed close to the welding arc and captures the fumes at the Source. The ductwork then carries the fumes away from the welder’s breathing zone and into the fan, which exhausts the fumes outside.

Conclusion

Now you know the importance of capturing welding fumes at the Source. There are a variety of methods that can be used to capture welding fumes, and the method you choose will depend on the type of welding you are doing and the amount of fumes that are produced. By using one of these methods, you can protect yourself and your employees from the harmful effects of welding fumes.